I.Spetsifikatsiya complete set of home.
Option 2 Wall
Glued beam d 210mm.
1. The set of documents
1. Installation drawings;
2. Specification of materials;
2. Bottom rail
1. Capillary waterproofing beneath bearing walls (isolayer)
2. antiseptified Plain board
3. The external walls of the 1st floor
Glued beam d 210mm.
4. INTERNAL WALLS
Glued beam d 210mm.
1.Kleeny power frame;
2. Insulation «Roswool» 100 mm; density of 35-40
3. Finish «block house» under the glued beam d 210mm.
1. Main glued beams (on the project);
2. glued frame of the secondary beams;
3. Ventilation membrane overlap;
4. Noise «Roswool» 100 mm; density of 35-40;
5. OSB 15 мм;
6. The bar of 40 x 40 mm;
7. Finishing the floor — decking 40 mm;
8. Optional: glued plitaPSL.
9. Optional: Noiseless overlap.
6. The external walls of the 2nd floor
1.Kleenoe log d210mm .; OR
2. Glued power frame;
3. Windshield + vent;
4. Insulation «Roswool» 200 mm; density of 35-40
5. Vapor + channel networks;
6.Vnutrennyaya and exterior trim «block house» under the glued beam d 210mm.
2. Glued ridge, podstropilnye beams, based on the characteristics of the project;
3. Insulation «Roswool» 200 mm (optional 300 mm); density 35;
4. Vapor barrier (membrane);
5. wind paper (membrane);
6. Bar change of direction (board batten finish the ceiling);
7. Wall or ceiling finish FCL;
8. Crate (bulletin for the organization of the roof ventilation gap);
9. Planed counter battens with thinned by technical conditions shingles (board for installation of roof tiles (except shingles) and the side roof ventilation.
Finishing ceilings — ceiling board 18 mm (spruce, pine) or GCR.
9. WINDOWS WOODEN from laminated veneer lumber, using German technology
Rectangular windows with double seal, aluminum ebb, leaf thickness — 82 mm, color of one color in color (paint system «SIKKENS»), double pane windows (36 mm) — two-chamber glass M1 tolsch.4 mm, opening windows — the rotary Foldable (1 flap at the opening), accessories «ROTO NT».
Windows oblique, round, stained area over 3m.kv., arched windows and less than 1 m2 — pay extra for complexity.
Muntin bars, rassteklovochnye transoms, mosquito nets, painting in two colors, shutters, blinds, steel and colored glass — extra paid.
Interior — paneled in knotty pine, clear lacquer, made in Finland or Rossii.Vysota canvases do2000mm., Shirina600-900mm. Furniture manufacturing in Finland.
Input (1 pc.) — Warmed, dyed-in SIKKENS, glazed — optional.
11. The molded products
Plinths, fillet, trim, window sills, layout, overhangs, wind, frontal, cornice boards, sills, obsady board terraces, garden fence, overlapping terraces, garden decoration, decoration of the roof, beams, rafters, and any other individual wooden elements related to the concept of a wooden house, except for non-structural decorative beams, wood carving, figure prirezki.
Stairs made of pine (knots allowed) on the string with a turn at 90º or 180º, with a platform or zabezhnymi steps (as architecture), lifting height of not more than 3 m, width 750-1000mm steps, without riser, with guardrails on the inner side of the opening fencing stairs finish — clear varnish work on the installation of the stairs. The cross sections of parts: 1) the bowstring (thickness 45mm, width — Statics) 2) steps (thickness 45mm, width not exceeding 300mm) 3) Playground (thickness 45mm, width not exceeding 900mm) 4) handrails (thickness 45mm, height 80mm) 5 ) supporting pillars stairs, fence posts (78h78mm) 6) square balusters (35h30mm) 7) guard aperture (length of not more than 1000mm 1.5 column) pay an additional: Replacing string on kosour, riser, finishing end-stage birch insert staircase valuable wood, toning, invitations (radius) steps, handrails (fencing) on the outer side of the ladder, replacing balusters, railing of the second light and its installation.
13. Preservative wall materials
The base layer of antiseptic (Finland);
1.All mounting hardware
(Nails, clips, bolts, hangers, ties, plates, etc.), except the metal beams
2.Mezhventsovy flax-jute seal.