I.Spetsifikatsiya home kit.
Option 10
Half-timbered houses
1. The set of documents
1. Installation drawings;
2. Specification of materials;
2. Bottom rail
1. Capillary waterproofing beneath bearing walls (isolayer)
3. The external walls of the 1st floor
1.Uglovye fachwerk rack: 240 x 240 mm;
2. Globe rack: 190 x 240 mm;
3. The horizontal beams calculated cross sections;
Filling fachwerk (glazing):
1.Vitrazhnye single chamber (bicameral) Glazed 32mm, 36mm. (6mm. + 6mm., Energy saving)
Filling fachwerk (blank walls):
1.Kleenaya wood stove (CLT) 95 mm. (Spruce, pine);
2. Front heater «Roskwool» density of 100 kg / m3 (100 mm.)
4. INTERNAL WALLS
1.Kleeny timbered 240h190mm.
2. Or glued timbered 190h190mm.
3. Or glued timbered 190h200mm.
Filling fachwerk:
Glulam cooker (CLT) 95mm. (Spruce, pine)
5. Mid-floor
1. Main glued beams (on the project);
2. glued frame of the secondary beams;
3. Ventilation membrane overlap;
4. Noise «Roswool» 100 mm; density of 35-40;
5. OSB 15мм;
6. The bar of 40 x 40 mm;
7. Finishing the floor — decking 32 mm;
8. Finishing the ceiling — ceiling board 12.18 mm. (Spruce, pine)
9.Optsiya: Laminated plate (CLT);
10.Optsiya: silent overlap.
6. The external walls of the 2nd floor
1.Uglovye fachwerk rack: 240 x 240 mm;
2. Globe rack: 190 x 240 mm;
3. The horizontal beams calculated cross sections;
Filling fachwerk (glazing):
1. Stained single-chamber (bicameral) Glazed 32mm, 36mm. (6mm. + 6mm., Energy saving)
Filling fachwerk (blank walls):
1. Laminated wood stove (CLT) 95 mm. (Spruce, pine);
2. Front heater «Roskwool» density of 100 kg / m3 (100 mm.)
7. Roofing
1. rafter (laminated plate CLT-option);
2. Glued ridge, podstropilnye beams, based on the characteristics of the project;
3. Insulation «Roswool» 200 mm (optional 300 mm); density 35;
4. Vapor barrier (membrane);
5. wind paper (membrane);
6. Bar change of direction (board batten finish ceiling)
7. Wall or ceiling finish FCL;
8. Crate (bulletin for the organization of the roof ventilation gap);
9. Planed counter battens with thinned by technical conditions shingles (board for installation of roof tiles (except shingles) and the side roof ventilation.
8. WINDOWS WOODEN from laminated veneer lumber, using German technology
1. rectangular windows with double seal, aluminum ebb, leaf thickness — 82 mm, color of one color in color (paint system «SIKKENS»), double pane windows (36 mm) — two-chamber glass M1 tolsch.4 mm, opening windows — tilt & turn (1 flap at the opening), accessories «ROTO NT».
2. Windows oblique, round, arched, stained glass for more than 3 sq.m. and the windows of less than 1 m2 — pay extra for complexity
3. shprosov, rassteklovochnye transoms, mosquito nets, painting in two colors, shutters, blinds, steel and colored glass — extra paid.
10. DOORS
Interior — paneled in knotty pine, clear lacquer, made in Finland or Russia. The height of the blade do2000mm., Width 600-900mm. Furniture manufacturing in Finland. Not the typical size, color — optional.
Input (1 pc.) — Warmed, dyed-in SIKKENS, glazed — optional.
11. The molded products
Plinths, fillet, trim, window sills, layout, overhangs, wind, frontal, cornice boards, sills, obsady board terraces, garden fence, overlapping terraces, garden decoration, decoration of the roof, beams, rafters, and any other individual wooden elements related to the concept of a wooden house, except for non-structural decorative beams, wood carving, figure prirezki.
12. LADDER
Stairs made of pine (knots allowed) on the string with a turn at 90º or 180º, with a platform or zabezhnymi steps (as architecture), lifting height of not more than 3 m, width 750-1000mm steps, without riser, with guardrails on the inner side of the opening fencing stairs finish — clear varnish work on the installation of the stairs. The cross sections for details:
1) string (thickness 45mm, width — Statics)
2) steps (thickness 45mm, width not exceeding 300mm)
3) Playground (thickness 45mm, width not exceeding 900mm )
4) handrails (thickness 45mm, height 80mm)
5) supporting pillars stairs, fence posts (78h78mm)
6) square balusters (35h30mm)
7) guard aperture (length of not more than 1000mm 1.5 column) pay an additional:
Replacing the string on kosour, riser, finishing end-stage birch insert, stairs made of valuable wood, toning, invitations (radius) steps, handrails (fencing) on the outer side of the ladder, replacing balusters, railing of the second light and its installation.
13. Preservative wall materials
The base layer of antiseptic (Finland);
14. ACCESSORIES
All mounting hardware
(Nails, clips, bolts, hangers, ties, plates, etc.), except the metal beams